Featured product - USB-I2C/SPI/GPIO Adapter U2C-12
USB-IO Interface Adapter - GPIO-24USB-IO Interface Adapter GPIO-24 allows connecting various hardware devices to you PC. Easy installation and plug-and-play support turns GPIO-24 adapter into ideal solution to add USB interface to your HW. |
 |
Features
- Each of 24 USB-IO Interface Adapter lines can be independently switched to one of the following modes:
- Digital Input Mode. USB-IO Interface Adapter sends notification to PC application when input value changes. Flexible configuration allows to set-up each line to send notification only after the specific change occurs (e.g. input level changes from high to low). To avoid sending of multiple notifications during contact bouncing, signal level is confirmed after it is stable for predefined period of time. It is also possible to send repeated notifications to inform application that input level is still the same.
- Digital Output Mode. USB-IO Interface Adapter drives previously set output value.
- Pulse-Width-Modulation (PWM) mode. USB-IO Interface Adapter produces PWM output with configured high time and low time periods. These periods can vary from 1 ms to 65.535 seconds (65535 ms).
- Signle Pulse Sending. USB-IO Interface Adapter sends single pulse with specified length and polarity. Pulse length can vary from 1 ms to 65.535 seconds (65535 ms).
- USB-IO Interface Adapter is field upgradeable.
Diolan engineers developed USB Bootloader that permits updating of the adapter internal program (firmware). For firmware update you only need to launch the special application while the device is connected to USB bus. - Automatic Plug-and-Play detection and notification.
GPIO-24 adapter driver detects when new device is connected to PC and sends notification message to SW application. - USB-IO Interface Adapter is USB powered.
GPIO-24 adapter doesn't need any external power supply unit or battery. Simply connect it to USB bus and it is ready for work. - USB-IO Interface Adapter is compatible with both 5V and 3.3V signaling environments.
GPIO-24 adapter can be easily switched between 3.3V and 5V voltage levels with the on-board jumper. - Up to 128 GPIO-24 adapters can be connected to single PC.
Unique ID number can be assigned to each GPIO-24 adapter. PC SW then uses this ID numbers to distinguish between different adapters. - Compatible with USB 2.0 (as well as 1.1 & 1.0) Full-Speed USB device specification.
- Windows Vista/XP/2000/98 32-bit and 64-bit compatible.
- RoHS Compliant.