Featured product - USB-I2C/SPI/GPIO Adapter U2C-12
| Accessories |
|---|
| I2C Cable for U2C-12 with Clips and Crocodile |
| Documentation |
|---|
USB-I2C/SPI/GPIO API 0.2.0 |
USB-I2C/SPI/GPIO API 0.2.0 |
Online API Documentation |
|
Schematics |
|
FAQ |
| Related products |
|---|
| USB-IO Interface Adapter - GPIO-24 |
U2C-12 USB-I2C/SPI/GPIO Interface Adapter Users Manual
3.7.4. U2C_SpiGetConfigEx()
U2C_RESULT U2C_SpiSetFreq( HANDLE hDevice, BYTE Frequency );
The U2C_SpiSetFreq() function configures SPI bus frequency.
Parameters:
- hDevice
Handle to the U2C-12 device.
- Frequency
The frequency of SPI bus, where:
For convenience following constants were introduced:- 0 corresponds to SPI bus frequency of 200 kHz.
- 1 corresponds to SPI bus frequency of 100 kHz.
- 1+n corresponds to the SPI bus clock period equal to 10 + 2*n uS.
U2C_SPI_FREQ_200KHZ 200 kHz U2C_SPI_FREQ_100KHZ 100 kHz U2C_SPI_FREQ_83KHZ 83 kHz U2C_SPI_FREQ_71KHZ 71 kHz U2C_SPI_FREQ_62KHZ 62 kHz U2C_SPI_FREQ_50KHZ 50 kHz U2C_SPI_FREQ_25KHZ 25 kHz U2C_SPI_FREQ_10KHZ 10 kHz U2C_SPI_FREQ_5KHZ 5 kHz U2C_SPI_FREQ_2KHZ 2 kHz
Return values:
U2C_SUCCESS
The SPI bus frequency value was successfully set.
U2C_HARDWARE_NOT_FOUND
U2C-12 device referenced by hDevice handle was not found.
