Log In
Featured product - USB-I2C/SPI/GPIO Adapter U2C-12
USB-SPI/I2C/GPIO Adapter U2C-12 | USB-IO Interface Adapter GPIO-24 | SPI Bus Host Adapter SPI-10 | USB PIC Development Board |
Accessories
I2C Cable for U2C-12 with Clips and Crocodile
Documentation
I2C Documentation    USB-I2C/SPI/GPIO API 0.2.0
I2C Documentation    USB-I2C/SPI/GPIO API 0.2.0
I2C Documentation   Online API Documentation
I2C Documentation    Schematics
FAQ   FAQ
Related products
USB-IO Interface Adapter - GPIO-24

U2C-12 USB-I2C/SPI/GPIO Interface Adapter Users Manual

  Prev   2.2.8. "SPI Bus" BarHome 3.1. U2C-12 device initialization routines   Next  

Chapter 3. API Documentation

Table of Contents

3.1. U2C-12 device initialization routines
3.1.1. U2C_GetDeviceCount()
3.1.2. U2C_GetSerialNum()
3.1.3. U2C_IsHandleValid()
3.1.4. U2C_OpenDevice()
3.1.5. U2C_OpenDeviceBySerialNum()
3.1.6. U2C_CloseDevice()
3.1.7. U2C_GetFirmwareVersion()
3.1.8. U2C_GetDriverVersion()
3.1.9. U2C_GetDllVersion()
3.2. I2C bus configuration routines
3.2.1. U2C_SetI2cFreq()
3.2.2. U2C_GetI2cFreq()
3.2.3. U2C_SetClockSynch()
3.2.4. U2C_GetClockSynch()
3.2.5. U2C_SetClockSynchTimeout()
3.2.6. U2C_GetClockSynchTimeout()
3.3. I2C high level routines
3.3.1. U2C_Read()
3.3.2. U2C_Write()
3.3.3. U2C_ScanDevices()
3.3.4. U2C_RW_Pack()
3.4. I2C low level routines
3.4.1. U2C_Start()
3.4.2. U2C_RepeatedStart()
3.4.3. U2C_Stop()
3.4.4. U2C_PutByte()
3.4.5. U2C_GetByte()
3.4.6. U2C_PutByteWithAck()
3.4.7. U2C_GetByteWithAck()
3.4.8. U2C_PutAck()
3.4.9. U2C_GetAck()
3.5. I2C wire level routines
3.5.1. U2C_ReadScl()
3.5.2. U2C_ReadSda()
3.5.3. U2C_ReleaseScl()
3.5.4. U2C_ReleaseSda()
3.5.5. U2C_DropScl()
3.5.6. U2C_DropSda()
3.6. GPIO routines
3.6.1. U2C_SetIoDirection()
3.6.2. U2C_GetIoDirection()
3.6.3. U2C_IoWrite()
3.6.4. U2C_IoRead()
3.6.5. U2C_SetSingleIoDirection()
3.6.6. U2C_GetSingleIoDirection()
3.6.7. U2C_SingleIoWrite()
3.6.8. U2C_SingleIoRead()
3.7. SPI bus configuration routines
3.7.1. U2C_SpiSetConfig()
3.7.2. U2C_SpiGetConfig()
3.7.3. U2C_SpiSetConfigEx()
3.7.4. U2C_SpiGetConfigEx()
3.7.5. U2C_SpiSetFreq()
3.7.6. U2C_SpiGetFreq()
3.7.7. U2C_SpiConfigSS()
3.8. SPI data transfer routines
3.8.1. U2C_SpiReadWrite()
3.8.2. U2C_SpiWrite()
3.8.3. U2C_SpiRead()
3.8.4. U2C_SpiReadWriteSS()
3.8.5. U2C_SpiWriteSS()
3.8.6. U2C_SpiReadSS()
  Prev   2.2.8. "SPI Bus" BarHome    3.1. U2C-12 device initialization routines   Next