DLN_GPIO_SET_DEBOUNCE Command and Response

The DLN_GPIO_SET_DEBOUNCE command is used to specify the minimum duration of the pulse to be registered (the Debounce interval).

DLN_GPIO_SET_DEBOUNCE Command

Go to response

Syntax

C/C++

 typedef struct
 {
    DLN_MSG_HEADER header;		
    uint32_t duration;			
 }	DLN_GPIO_SET_DEBOUNCE_CMD;

Parameters:

header

Defines the DLN message header DLN_MSG_HEADER. The header contains several predefined fields and is used to identify and route messages. You must fill the following fields before sending the command:

Field	Description
size	The size of the message. Must be equal to the size of the DLN_GPIO_SET_DEBOUNCE_CMD structure.
msgId	Identifies the message. For the DLN_GPIO_SET_DEBOUNCE command it must be set to 0x0104. You can use the DLN_MSG_ID_GPIO_SET_DEBOUNCE constant.
echoCounter	Can be used to link a command to a response. The response will have the same echoCounter value. This field can be any numerical value from 0 to 0xFFFF (65536).
handle	A handle to the DLN-series adapter.

duration

Minimum duration of the pulse to be registered. The duration is specified in μs from 1μs up to 4,294,967,295μs (~1h 10m). This value will be approximated as the closest debounce duration supported by the adapter. See Debounce Filter for details.

DLN_GPIO_SET_DEBOUNCE Response

Go to command

The adapter sends the DLN_GPIO_SET_DEBOUNCE response after the DLN_GPIO_SET_DEBOUNCE command execution. The response will contain the minimum pulse duration approximated as the closest to user-defined value.

Syntax

C/C++

 typedef struct
 {
    DLN_MSG_HEADER header;		
    uint8_t result;				
    uint32_t duration;			
 }	DLN_GPIO_SET_DEBOUNCE_RSP;

Parameters:

header

Defines the DLN message header DLN_MSG_HEADER. The response header contains the following fields:

Field	Description
size	The size of the message. It is equal to the size of the DLN_GPIO_SET_DEBOUNCE_RSP structure.
msgId	Contains the message id. For the DLN_GPIO_SET_DEBOUNCE response it is set to 0x0104. The DLN_MSG_ID_GPIO_SET_DEBOUNCE constant can be used to check the message ID.
echoCounter	Links a command to a response. The echoCounter value is copied from the respective command header.
handle	A handle to the DLN-series adapter. You can use the handle field to determine the adapter that have sent the response.

result

Contains the result of the command execution. For DLN_GPIO_SET_DEBOUNCE command DLN-series adapter can return the following result values:

Return Code	Description
DLN_RES_SUCCESS	Debounce interval has been successfully set.
DLN_RES_COMMAND_NOT_SUPPORTEDD	Debounce filtering is not supported in the adapter.

duration

Contains minimum debounce interval approximated as the closest to user-defined value. The duration is specified in μs.

DLN_GPIO_SET_DEBOUNCE Command and Response