Development Boards

PIC USB Development Board is an ideal solution to start your PIC18F4550 or PIC18F4455 based device development. Our demo board comes with preprogrammed USB PIC Bootloader that allows you to upload firmware through standard USB connection. XTEA encryption protects your firmware from unauthorized copying. Enclosure gives you prototype look like it comes from mass production.

  • LPC-4350-DB1 Development Board

    LPC-4350-DB1 Development Board

    The LPC-4350-DB1 Development Board with LPC4350FET256 ARM Cortex-M4 digital signal controller with Cortex-M0 co-processor allows you to carry out your development with variety of instruments, interfaces (SPI, GPIO, I2C, HDMI, LCD, Ethernet) and with a minimal cost for hardware components. Open source demo examples and schematics are also available.

    features buy online
    • LPC4350FET256 ARM Cortex-M4 digital signal controller with Cortex-M0 co-processor.
    • 20-pin 2.54mm (0.1 inch) ARM Standard JTAG/SWD connector.
    • Wide range of extension boards.
    • 16MB external NOR flash.
    • 4 user push buttons and RESET button.
    • 5 LEDs (4 green LEDs + 1 red LED).
    • Free open source applications
    • USB mini-B connector 2.0 High-speed (12 MHz) compatible
    • 10/100MBit Ethernet interface (PHY and connector)
    • RoHS Compliant
  • LPC-1850-DB1 Development Board

    LPC-1850-DB1 Development Board

    The LPC-1850-DB1 Development Board allows you to carry out your development with variety of instruments, interfaces and with a minimal cost for hardware components. Open source demo examples and schematics are also available.

    features buy online
    • LPC1850 ARM Cortex-M3 microcontroller.
    • 20-pin 2.54mm (0.1 inch) ARM Standard JTAG/SWD connector.
    • Wide range of extension boards.
    • 16MB external NOR flash.
    • 4 user push buttons and RESET button.
    • 5 LEDs (4 green LEDs + 1 red LED).
    • Free open source applications.
    • USB mini-B connector 2.0 High-speed (12 MHz) compatible.
    • 10/100MBit Ethernet interface (PHY and connector).
    • RoHS Compliant.
  • PIC USB Development Board PIC-1

    PIC USB Development Board - PIC-1

    PIC USB Development Board is an ideal solution to start your PIC18F4550 or PIC18F4455 based device development. Our demo board comes with pre-programmed USB PIC Bootloader that allows you to upload firmware through standard USB connection. XTEA encryption protects your firmware from unauthorized copying. Enclosure gives you prototype look like it comes from mass production.

    description buy online
    • Comes with preprogrammed PIC USB Bootloader.
    • All elements are located at PCB upper layer.
    • PIC-1 is quite small - 85x53.7 mm (3.35x2.11").
    • Comes with assembled PIC18F4455 microcontroller.
    • All 24 I/O pins are accessible through DBH26 connector.
    • PIC-1 can be used in either 3.3V or 5V circuits.
    • XTEA encryption.
    • Powered from USB.